Triangular vs Trident.
Pick your bite.
Both profiles are machined to the same 11.5 mm standard and screw into your sole in minutes. The only real decision is the head â and it decides how the stud bites the ice.
One stud, two personalities
Both start as hardened stainless steel. The difference is the bite: a three-sided point that chisels into hard ice, or a multi-claw crown that grabs in every direction.

The Chisel
The head is cut into a triangular, three-sided edge. Its tiny contact patch turns your body weight into concentrated pressure â the stud drives in like a chisel with every step.

The Anchor
The head is a concave crown with three to four independent micro teeth. It bites from every angle and its gaps shed meltwater and slush â so you stand steady on ice-fishing holes and wet docks.
Why the head shape matters
Triangular â pressure physics
Pressure = force ÷ area. A three-sided point keeps the contact area tiny, so the same step concentrates maximum force onto one spot. That is why it shears into dense old ice and blue ice like a cold chisel.
- Optimal for extreme cold and pure mirror-hard ice
- Each step drives deep and locks
Trident â multi-tooth crown
Instead of one point, three or four independent micro teeth form a crown. The gaps act like tread â pushing away the thin meltwater film and loose snow so the stud bites ice instead of hydroplaning on the mix.
- Optimal for ice fishing, wading and slush-covered ice
- Steadier stance and safer turns and side-pulls
Triangular vs Trident
Both fit the same soles and use the same 11.5 mm body. The choice is about where you walk.
| Triangular · Three-Sided | Trident · Multi-Claw | |
|---|---|---|
| Core strength | Instant ice-breaking, deepest single-point bite | All-direction anti-slip; sheds slush & water; stands steadier |
| Best scenario | Extreme cold, hard mirror & blue ice, frozen slopes | Ice fishing, wading, slush/ice mix, snow-dusted walking |
| Foot feel | Sharper, more pronounced on hard indoor surfaces | Even pressure Distributin; calmer feel underfoot |
| Fit: 12 mm+ solid soles | Yes | Yes |
Exactly 11.5 mm â Every stud
Compact enough to sit flush with your tread, sharp enough to bite glare ice. Machined to tight tolerances across both profiles.
- Overall length
- 11.5 mm / 0.45 in
- Hex head width (load platform)
- 9 mm / 0.32 in
- Thread diameter
- 4 mm / 0.157 in
- Flange
- 3.5 mm / 0.137 in
- Tip height
- 0.7 [m / 0.027 in
- Material
- Hardened stainless steel
Which one should you pick?
Match the profile to the ground you actually walk on. For a balanced layout, plan 8â10 studs under the forefoot and 4â6 under the heel of each boot.
Ice fishing & slush
Holes, meltwater, ice chips and packed snow â the Trident's multi-claw crown sheds debris and keeps you anchored while you pull fish and pivot.
Hard glare ice & slopes
Frozen hills and pure mirror-flat ice reward a point that bites deep on every step. The Triangular profile is your chisel.
Mixed winter walking
Sidewalks, docks and trails vary every day. Combine both: triangular under the forefoot for bite, trident under the heel for control.
Both kits screw in with the included wrench in about 5 minutes. No cobbler, no glue, no pre-drilled holes. Remove them in seconds when the ice thats. Reinstall next winter.
Ready to grip harder on ice?
Original patented design â protected by Chinese and European Union design patents. Ships fast from our store to the US & Canada.