Screw-In Ice Studs for Boots - 26 Pack Triangle Grip with Installation Tool

Screw-In Ice Studs for Boots - 26 Pack Triangle Grip with Installation Tool

$17.15
Skip to product information
Screw-In Ice Studs for Boots - 26 Pack Triangle Grip with Installation Tool

Screw-In Ice Studs for Boots - 26 Pack Triangle Grip with Installation Tool

$17.15
StudlyLab · Triangle Grip
Screw-In Ice Studs for Boots
26 Pack with Installation Tool

Permanent winter traction for hikers, commuters and anyone who walks on icy sidewalks. Screw in once — grip all season. No bulky over-boots, no cobbler, no glue.

304 Stainless SteelTriangle GripTool IncludedSolid Soles Only
26 triangle ice studs with installation tool
14
14-Day ReturnsUnused, original packaging
$
Free Shipping Over $25Otherwise $5.99
◎
304 Stainless SteelRust-resistant hardened studs
The problem

Ice doesn't care how expensive your boots are.

Every winter the same patch of sidewalk turns into a hazard. Over-boot cleats are bulky, noisy indoors and easy to lose. Your boots are fine — they just need the right grip.

  • Walk icy sidewalks, trails and parking lots with confidence
  • No change to how your boot looks or flexes
  • Remove in spring — your boots stay normal all summer
Walking on snowy trail with studded boots
Why you'll like them

Four reasons these studs earn their spot in your boots

01

304 Stainless Steel

Hardened, rust-resistant steel that lasts multiple seasons of ice, slush and salt.

Rust-resistant
02

Triangle Grip Profile

Three contact edges bite into ice and packed snow — a proven all-round winter profile for walking.

3-point bite
03

Installation Tool Included

Screw into your boot's existing tread lugs in about 5 minutes. No cobbler, no glue.

5-minute install
04

Built for Solid Rubber Soles

Hard rubber lug soles (hiking, work, wading boots) 12 mm+ thick at the lugs seat the thread fully.

Solid soles only
Specifications

Engineered dimensions, locked down

Stud dimensional drawing with annotations
Total stud length 15.5 mm (0.61 in) — 4 mm head + 11.5 mm threaded point
Threaded point 11.5 mm (0.45 in) — self-tapping
Tip height 11.5 mm (0.45 in)
Flange base 9 mm (0.35 in) — sits flush, spreads your weight
Drive head 3.5 mm (fits standard wrench / hex key)
Pack size 26 studs + 1 installation tool

On typical lugged boots the raised lugs sit about 4 mm above the grooves, so the 11.5 mm thread leaves roughly 7.5 mm of point working against the ice.

Compatibility — read before you buy

Quick Compatibility Check

✓ WORKS WITH

  • Solid hard-rubber lug soles
  • Hiking / work / wading boots
  • 12 mm+ sole thickness at the lugs

✕ AVOID

  • Hollow / soft EVA foam soles
  • Thin running-shoe soles
  • Cork or air-chamber midsoles
These screw-in studs work on solid soles only. Total thickness from the outer tread lugs to the inner insole surface must be at least 12 mm, so the 11.5 mm thread seats fully without reaching your foot. They will NOT hold in hollow soles, soft EVA/foam outsoles, thin running-shoe soles or cork midsoles — the thread has nothing to grip and studs may fall out. We are not responsible for studs falling out or piercing thin soles when installed on unsuitable shoes.

Placement: 8–10 studs across the forefoot, 4–6 in the heel. For outdoor ice/snow use only — metal tips will scratch tile, hardwood and polished floors. Install on your boot's existing raised tread lugs and stop screwing once the flange sits flush with the lug surface.
Installation

Installed in 3 simple steps

1

Mark the lugs

Choose solid tread lugs — 8–10 in the forefoot, 4–6 in the heel.

2

Screw in

Drive each stud with the included tool until the flange sits flush with the lug surface.

3

Walk the ice

Test on packed snow first. Remove in spring — boots return to normal.

Use only on solid rubber soles 12 mm+ thick at the lugs. See the compatibility check above before you install.

What's in the box

Everything you need, nothing you don't

  • 26 x hardened 304 stainless steel triangle studs
  • 1 x installation tool
  • Stud length 15.5 mm (4 mm head + 11.5 mm threaded point)
  • 9 mm flange base — sits flush and spreads your weight
  • 3.5 mm drive head (fits standard wrench / hex key)
26 loose triangle studs close-up
Real-world use

Made for the days other boots stay home

Hiker on snowy mountain trail
Winter hikes — traction on snow-packed trails
Angler fishing on icy rocks
Ice fishing & shoreline — grip on frozen rock
FAQ

Questions buyers ask before ordering

Will these damage my boot soles?
Not on compatible boots — hard rubber, 12 mm+ at the lugs, solid (not hollow). On incompatible soles they can crack or tear out, which is why we publish the full compatibility guide: Compatibility guide.
How long do they last?
Multiple seasons on ice and packed snow. Bare concrete and gravel grind the tips — use studded boots only on winter surfaces. Details: Durability guide.
How long does delivery take?
We ship from Jinjiang, China with tracking. Delivery to North America typically takes 1–3 weeks depending on customs — exact estimates at checkout.
What is your return policy?
14-day returns on unused items in original packaging — email fjdj8@126.com. Full policy: Refund policy.
Can I wear them indoors?
No — the steel tips will scratch tile, hardwood and stone floors. Winter surfaces only.

Shipping

Ships from Jinjiang, Fujian, China (362000) with tracking. Flat rate $5.99, free over $25. North America typically 1–3 weeks*.

Returns & Support

14-day returns on unused items in original packaging. Refunds in 5–10 business days to your original payment. Shipping fees not refunded. Support: fjdj8@126.com.

You may also like